discount 70% in 2018-10-14 to 2018-10-16
price: USD$ 29.40
freight :USD$7.00,(Postal parcel)
Search Similar or mail to saler or send message to saler
Please check the size of the picture above, and then buy, we are HD pictures.
[filter core configuration]
Ultrafiltration membrane filter element 1
[filter core function]
Japan imported MITSUBISHI, made of wire diameter PES film 0.01 micron, at room temperature to a certain pressure and flow, the use of asymmetric microporous structure and semi permeable medium, rely on the pressure difference across the membrane as the driving force to cross flow is filtered, the solvent and small molecules by macromolecules and particles such as protein, water-soluble polymer and bacteria was membrane retention, so as to achieve the purification of drinking water. Can effectively remove bacteria and viruses, amputation rate greater than 99.99%, comprehensive care of healthy drinking water;
[replacement time of filter element]
The filter element needs to be washed with tap water before changing and washing away the dust on the surface of the filter element. in useIt is suggested that the filter core be cleaned once every four months. If the water of the filter bucket is smaller, it is recommended that the filter be cleanedCore. The filter element is a post fine filter element, which needs to be replaced after 24 months of useOnly in this way can the bacteria be adequately protected from bacteria.
Cleaning method of ultrafiltration filter element
1, special cleaning fluid and beautiful water ultrafiltration filter by 1:5 (volume ratio) the proportion of fully mixed in the container, then the ultrafiltration filter static immersion, soaking time 100-120 minutes (for the first time without immersion) (see Figure 5)
2, take out the ultrafiltration filter, with the backwash water ultrafiltration filter element for about 10-20 minutes (see Figure 6, Figure 7)
3, after washing the ultrafiltration filter cartridge installed in place, you can use normally.