1. stopwatch function
2. segment display function
Display functions of 3. hours, minutes, seconds, months, days and weeks
4. time and whole point time function
5. temperature range of -5~+50 C
1 press mode key M transition state
The 2 date shows: the normal travel time state, according to the S key, show the month, the day
3 when the show: normal walking state, press R key, show the noisy time
4 noise control: normal travel time state, hold down the R key, show the noisy time, at this time
5 click the S key, the right corner appears, ringing.
6 again press the S key, disappear, cancel the noise.
7 whole point time control: when the normal travel time state, hold down the R key, show the noisy time, at this time
8 if the M key is pressed, the week standard appears, or disappears, it can control the timing of the whole point.
Stopwatch working state
1. single time interval measurement: start by S key, then stop according to S key, press R button 0,
When the test time interval is <29 '59.99, the minimum display unit is 1/100 seconds
When the time interval is tested >29 '59.99, the minimum display unit is second
The longest measurable interval time is 23H59M59S.
2. segment time, according to S key, then R key stop, display interval time;
Then press the R key, and the time shows, from the start to the second time the R key
Time interval,... As it goes down, it can measure a lot of time
Reset method, after the R key, then press the S key, then click the R button to reset.
Time and time adjustment
1. time adjustment
Press the M key to show the state of the time,
According to the R key selection or flash, and then press S key to adjust the noisy time.
2. walk time adjustment
Press the M key to show the travel time state,
According to the R key, select time, minute, second, day, month, and week flashing, according to the S key
Don't adjust it.