discount 70% in 2018-09-21 to 2018-09-23
price: USD$ 3920.00
freight :USD$7.00,(Postal parcel)
Search Similar or mail to saler or send message to saler
Welcome to the store
Non negative pressure tankStainless steel negative pressure tank without negative pressure tank
The supply of non negative pressure tankStainless steel negative pressure tank without negative pressure tank
Because the product model is too much, it may not be in stock
Department Manager: Xia Manager
Non negative pressure steady flow tank Summary
Steady flow tank, also called steady flow compensator, is one of the important parts of non negative pressure water supply equipment. Non negative pressure tank,The function of the negative pressure tank is to eliminate the negative pressure with the municipal pipe network, eliminate the two pollution, and intelligently compensate the flow of water.The device is directly connected by a steady flow tank and a tap water pipe network, and directly supplies water by two times according to the setting mode, and does not generate negative pressure equipment to the tap water pipe network. It mainly consists of water pump unit, non negative pressure steady flow tank, frequency conversion water supply control cabinet, valve, instrument, pipeline, equipment base and so on.
Non negative pressure water supply equipment normally put into use, the municipal pipe network water into the non negative pressure steady flow tank, a drain tank of air from the exhaust valve, when the air is exhausted, the floating ball valve is raised by water drive, plug to the closed position, slowly close the exhaust port, to stop the exhaust, to prevent water, when the steady flow the water tank of normal transport, such as a small amount of air accumulation to a considerable extent in the tank, the tank water level drops, the floating ball drops, the air is the air outlet.
The normal operation of the equipment in the process, when the municipal pipe network of water shortage, municipal water flow air pipe, or steady flow tank internal water pressure below atmospheric pressure, the water level in the stable current tank drops, the floating ball drops, drives the plug head open, inhalation of air, keep the air pressure steady flow tank, not the municipal pipe network to generate negative pressure.
When the pressure in the municipal pipe network is lower than the set pressure required by the user, the frequency conversion speed regulation operation of the water pump ensures the user's pipe network pressure to meet the requirements of the user's water. The higher the water pressure of the municipal pipe network, the lower the speed of the pump, the lower the water pressure of the municipal pipe network, the higher the speed of the pump. When the water supply pressure of municipal pipe network meets the user's requirements, the equipment stops working automatically, and the water of the municipal pipe network is directly supplied to the users through the bypass pipe.
When the municipal pipe network is closed, the water level in the steady flow tank falls gradually. When the water level reaches the minimum water level, the liquid level meter on the steady flow tank sends out the stop signal, and the equipment stops running automatically and shows the water shortage protection signal.
When the power grid is out of power, the equipment is shut down, and the water in the municipal pipe network is directly supplied from the bypass pipe of the equipment to the user.
Non negative pressure steady flow tank Working principle：
1Material selection4mmThickPlate, welding wire, flange, short tube
2The professional polishing personnel and equipment are used for polishing the non negative pressure tank, so that the whole tank can be made into mirror surface with clear curve and beautiful appearance.
3The butt joint of non negative pressure tank head and tank can be welded by lining plate, double wrapping outside and double protection. Both sides of the tank are welded by double sides welding, which makes the life of the pot increase and the pressure is greater.
Non negative pressure steady flow tank device
Use4mmthickTheSheet, double protection, automatic alarm device for import and export. If the first pass fails, the second switch is automatically used and alarm, the equipment can operate normally, but the user should notify our personnel to repair.(Absolutely avoid water full basement, damage equipment)。
Non negative pressure steady flow tank Characteristic
1Save land, save installation time
No need to build a pool or water tank, complete sets of equipment to the site directly installed, municipal pipe network directly and non negative pressure tank butt, water pump outlet and user network docking(Municipal pipe network docking without negative pressure tank must be added to the valve to facilitate maintenance)。
2Pure water quality
The tap water is supplied directly to the user after pressurization without the negative pressure unit. No negative pressure tube is sealed by stainless steel, and it is separated from air. The water quality has no pollution, and the users can drink good water source.
3Energy saving and water saving
By means of municipal tap water pipe network pressure in operation, and on the basis of pressurization, pressure adjustment, constant voltage, low voltage protection, phase failure protection, leakage protection, overload protection, overheat protection, water protection, water does not stop the pump, instantaneous trip protection function. In addition, the man-machine interface can be configured according to the user's needs, and the remote adjustment, monitoring and maintenance can be visualized.
The supply of non negative pressure tank Stainless steel negative pressure tank without negative pressure tank
Negative pressure elimination technology of steady flow tank
Non negative pressure equipment adopts microcomputer frequency conversion technology and effective negative pressure treatment technology to realize pressure superposed water supply. Specific as follows: the equipment through the steady flow tank vacuum compensation system and fully enclosed structure to achieve a direct connection with the tap water pipe network, and overcome the adverse impact on the pipe network. The device through the pipe pressure gauge, vacuum suppressor and compensator in the detection device for collecting the steady flow tank within the vacuum and water level signal, real-time feedback, through the microcomputer control device and special vacuum suppressor compensator in the suppression of negative pressure, ensure steady flow can affect the city network equipment does not eliminate the negative pressure.
When the municipal pipe network is stopped, the water pump unit can still work until the pressure in the steady flow tank drops to the lower limit set by the electric contact and stops automatically, and the water pump is automatically started after the water is put in. When the power failure occurs, the pump unit stops working, and the tap water can enter the user's pipe network through the through pipe. When the incoming call, the unit automatically starts to return to normal water supply.
Negative pressure suppression system of steady flow tank
According to the conditions of negative pressure generation, the intelligent control technology is adopted, and the operation condition of the equipment is automatically controlled according to the requirements of the pipe network, so as to eliminate the negative pressure in the steady flow tank. When the pressure of the main network in the setting of protection pressure when running over equipment, normal water supply, when the pressure of the main network in the setting of protection pressure following operation of water supply equipment, water buck, automatic adjustment of equipment operating conditions, when the pressure of the main network to further reduce restrictions on the use of pressure, water supply equipment to stop running, the equipment to meet the network constraints smooth, stable adjustment of the pump outlet flow, the maximum meet user requirements.
Product use of steady flow tank
The new residential buildings or living water;
We have built a pond, water tank water supply mode in order to completely eradicate the transformation of water pollution;
The industrial production and living water;
The water supply system of urban middle long distance water pressure station, regional water supply pressure station, high regional concentration of pressurized water supply station.
Installation requirements of steady flow tank:
1Before installation, we should carefully check whether there is any hard substance in the pump body, so as to avoid damaging the impeller and pump body during operation.
2When installing, the pipe quantity is not allowed to be added to the pump, so as to avoid the deformation of the pump and affect the normal operation.
3Tighten the anchor bolts so as to avoid vibration when starting and affect the performance of the pump.
4The control valve is installed on the inlet and outlet pipes of the pump, and the pressure gauge is installed near the outlet of the pump to control the pump running in the rated working condition, so as to ensure the normal use of the pump.
5The discharge valve, such as the check valve should be installed outside the gate valve.
6The installation method of pump is divided into rigid connection installation and flexible connection installation.
In order to St.Company producedStainless steel steady flow tankHave the following characteristics:
1.The non negative pressure steady flow tank adopted by our company is adopted304Made of stainless steel, through machinery Wire drawing The polished surface, beautiful appearance, with stainless steel metal texture.
2.The welding material with the same material as the stainless steel tank body is used, the weld is beautiful in shape and the welding effect is good, and the welding is reliable under the precision argon arc welding process.
3.The structure of the tank can be made according to the actual needs of the customers.
4.Our company can provide users with all kinds of non negative pressure water supply equipment partsOEMService.
1. The product is produced according to the national standard and manufacturer's technical standard;
2, the purchase of our products, enjoy free maintenance within a year (except vulnerable parts); in the warranty period, if there is a small piece of damage, we express parts replaced by buyers, if it is a big problem can not be repaired, return to factory maintenance or replacement.
3. The products are packed in wooden boxes, with a set of product instructions and certificate.
Our products are tax free, excluding freight, if you want to invoiceSpecial invoice for value added taxadditional12 pointsInvoice plus5Point.
The baby sold in the store because of heavy weight, large size, all goods shipped through the logistics (some small products can contact the shopkeeper to send express, parents pay attention to, oh, express cost is not cheap Oh! Due to different provincial cities, logistics costs are different, and the actual cost is mainly based on logistics waybill. (Note: goods shipped logistics, need to go to the local logistics company to take their own goods!) Because the location is different, the logistics arrival time is different, please don't worry too much! Thank You for Your Cooperation！ Happy shopping!
Buyers must read
In the inquiry process, often there will be customer consultation, which kind of water pump suitable for their use, and require the seller to provide specific models.
In this case, the seller will be based on the information provided by the customer, recommend the relevant pump model to the customer.
The store has more than 10 years of pump entity store business experience, in the long process of operation has accumulated a wealth of water pump professional knowledge, and in place to establish a good reputation, so the dispensers provide recommendations have high value, it is worth reference.
However, there are differences between online shop management and entity management, and the sellers can not conduct on-the-spot investigation on the water environment of the shop customers due to the restriction of the space and region, so there is no such a situationDue to the difference between the customer's response and the actual situation, the recommended pump can not meet the actual requirements of the customer.
The receipt of a statement otherwise, please carefully read, thank you.
When receiving the goods, please in the logistics company personnel witness, when faced with the machines were opened, carefully check the damage, does not exist in the machine to confirm the sag, hardware defects produced by external parts, accessories for loss, can be on the waybill receipt confirmation bar sign.
In order to save your time, please browse the product details, and then understand the product information with the customer service.
Because the product model is too many, may not have the spot, if the seller does not have on-line, may pat, guaranteed arrivesProduction completed within 5-7 days, please contact with customer service before shooting, such as customer service is not online, please telephone consultation
1. Alipay (recommended)
2., the company's product contract system, you can contact customer service money to the boss account.