Menu

Connect with us

YK-915 corrosion repair agent of high strength corrosion resistant acid and alkali corrosion resistant coating glue glue

[features] - YK-915 corrosion resistant repair agent is a ceramic powder as anticorrosion material aggregate with high performance and high density of the two components, low viscosity, brush, resistance to acid and alkali. Liquid and easy to brush, and the surface to be repaired with high strength after curing to form a smooth hard surface, corrosion resistance, erosion resistance, wear protective coating. [applicable scope] - outstanding resistance to erosion and cavitation. For a pump, valve, fan wheel, local

price:USD$216.00
discount 70% in 2018-10-15 to 2018-10-17
price: USD$ 151.20
freight :USD$18.00,(Express)
freight :USD$7.00,(Postal parcel)
views:0
Search Similar or mail to saler or send message to saler

Pay with PayPal, PayPal Credit or any major credit card

[features]

YK-915Corrosion resistant repair agent is a ceramic powder as anti-corrosion materials with high performance and high density of aggregate,Two components, low viscosity, brush, resistance to acid and alkali.Liquid and easy to brush, and the surface to be repaired with high strength after curing to form a smooth hard surface, corrosion resistance, erosion resistance, wear protective coating.

[applicable scope]

Erosion and cavitation characteristic. For a pump, valve, impeller, fan blades, local water tank, pipeline, exchanger, reactor storage equipment repair and large area pre protective coating.

[performance]

project

index

colour

blue

The density (g/cm3

1.65

The weight ratio (A:B

5:1

The volume ratio (A:B

4:1

The operation time (200gMixed,min25

45

Complete curing time (h25

24

After curing, hardness(ShoreD)GB/T2411-1980

86

compressive strength(Mpa) GB/T1041-1992

100

tensile strength(Mpa) GB/T6329-1996

35.5

shear strength(Mpa) GB/T7124-1986

25

working temperature

-60150

Reminder:This parameter is under laboratory conditions(temperature23±2Relative humidity.50±5%Get, due to the complicated operation conditions, users are advised to do pre test according to the actual conditions.

[Methods]

Surface treatment: polishing or sandblast clearance by the dust, sticky surface oil and rust, and finally use the cleaning agent.

With glue: according to the ratio of the two components are mixed evenly, the same color.

Glue: adhesive coating will adjust the good uniform coating on the surface are protected with a certain thickness.

Room temperature curing24hFully cured or at room temperature1h+Heating to80heat preservation2hCompletely cured.

[note]

The temperature is lower than the15℃When should take appropriate heating measures or should extend the curing time.

When the ambient temperature is high or when a large amount of mixing will shorten the operation time.

This product is in the cool dry environment in airtight storage, shelf life2Non dangerous goods transport.

This product is a non dangerous goods, but not the entrance and avoid direct contact with eyes, long body.

[storage and packaging]
Should be stored in sealed ventilation, cool and dry place; 
Quality guarantee period24A month overdue the test, can continue to use;
Packaging specifications500g/Group,16group/Box.