Connect with us

DMF-0.1 type electromagnetic gas safety shut-off valve is not higher than 120 DEG DN600

discount 70% in 2018-09-21 to 2018-09-23
price: USD$ 5670.00
freight :USD$18.00,(Express)
freight :USD$7.00,(Postal parcel)
Search Similar or mail to saler or send message to saler

Pay with PayPal, PayPal Credit or any major credit card


Brief introduction of DMF-0.1 electromagnetic gas safety shut-off valve: 
DMF-0.1 electromagnetic gas safety shut-off valve produced by our factory new generation of products. Electromagnetic gas safety shut-off valve not only overcomes the common electric cut-off valve cut off the disadvantages of slow speed, complex control, and can immediately cut off the gas in power, to ensure the safety of production.
DMF-0.1 electromagnetic gas safety shut-off valve is mainly composed of electromagnetic starter and butterfly valve with good sealing performance. It has the advantages of simple structure, convenient operation, reliable operation, fast cutting speed and good sealing performance. The sealing ring is generally oil resistant rubber,
Two, DMF-0.1 electromagnetic type gas safety shut-off valve use 
Most of the modern industrial furnaces using coal gas as fuel are low pressure gas burners, which provide combustion air by professional fans. Most kilns also use air to heat devices. In the production process, once the gas pressure is too low, the burner can not work properly, should immediately cut off the gas and stop the fan, except for special cases. This ensures the safety of production and does not make the furnace rapidly cool down. If the gas failed to cut off the gas, there is a certain pressure, possibly by mixed gas burning nozzle into the wind pipe, in particular to a wind pipe heating device, the temperature drop will form a negative pressure, make it easier for the gas into the air duct, and then form a mixture of explosive in the wind pipe or furnace. When the ignition will often cause an explosion, causing the accident. This has happened repeatedly. This product is for the design and development, is the ideal equipment for various industrial furnace gas production safety as the indispensable material.
Gas pressure for many reasons, including low gas pressure due to power outages, the current gas shut-off valve is driven by the motor, power cannot action, so the gas pressure caused by power outages, can not achieve the safety protection. This product overcomes this shortcoming, and the cutting speed is much higher than the electric shut-off valve, which is more in line with the safety requirements. This product can also be used in other occasions with similar requirements.
Three, DMF-0.1 electromagnetic gas safety shut-off valve structure and working principle
DMF-0.1 type electromagnetic gas safety shut-off valve by valve, air tightness high traction electromagnet, a lever device, a locking pin, hammer and spring structure, the structure and working principle (see Figure 1)

Technical specifications of four and DMF-0.1 electromagnetic gas safety shut-off valve:
1, electromagnet according to AC 220V, the capacitance is about 220VA supply (special requirements, the factory can also supply)
2. The nominal pressure of the valve is PN0.1MPA.
3, butterfly valve size see Table 1 (flange and JB81-59 consistent).
4, cutting time: one second
5, medium temperature: -20~180.
6. Environmental temperature: -20~60.

Five, DMF-0.1 electromagnetic type gas safety shut-off valve size table:



DN D D1 D2 L L1 L2 H b Z-φd
100 205 170 145 120 360 250 550 14 4-18
150 260 225 200 145 410 250 590 16 8-18
200 315 280 255 145 465 250 640 18 8-18
250 370 335 310 180 520 250 690 22 12-18
300 435 395 362 180 580 300 740 22 12-23
350 485 445 412 200 630 300 790 22 12-23
400 535 495 462 200 680 300 840 22 16-23
450 590 550 518 200 740 300 880 24 16-23
500 640 600 568 270 780 300 930 24 16-23
600 755 705 670 270 895 400 1020 24 20-25
700 860 810 775 270 1010 400 1100 24 24-25
800 975 920 880 270 1125 400 1190 26 24-30
900 1075 1020 980 270 1225 400 1280 26 24-30
1000 1175 1120 1080 300 1345 400 1360 26 28-30

Installation and application of six and DMF-0.1 electromagnetic gas safety shut-off valve
1, the product can be installed horizontally or vertically, the user does not specify the installation requirements, according to the level of installation of hair supply.
2, this product has a handle and the lock pin (see Figure 1, 3, 2) for the installation and commissioning, operation must be tripping.
3, hammer must have protective grid to protect personal safety, this product with energy dissipation spring, the best use of the lower part of the flexible buffer stop.
4, outdoor installation, must be equipped with rainproof cover (when the user requests, the factory can be matched supply)
Seven 、 DMF-0.1 type electromagnetic gas safety shut-off valve order description:
When ordering, please specify the following contents:
1. Nominal diameter of valve
2. Medium pressure
3, the electromagnet power supply voltage (no special needs can not mention).
4, other special requirements (add flange, high temperature hard seal, etc., the factory can supply).
5, DCK-1 electromagnetic gas safety valve controller for its ancillary products, users can not choose, self designed control circuit.
6, other special requirements (such as sealing material, etc.).

The postage of our company is for reference only

The goods sent by the company are in agreement with the carrier, and have taken protective measures. You or your family (or colleagues) (units) in the receipt of goods courier or parcel, please be sure to check the goods in the courier company staff before the test is complete, the number is correct, and then sign; as the first sign and then please check must be deliveryman surface inspection, such as there are problems on the spot and the carrier, if there is damage, ask the staff issued a "damaged goods proof" (courier to sign and then refused) by courier the goods returned to the company responsible for the change. Otherwise, because of the damage caused by transportation, after the receipt, then ask the owner to replace parts or say the amount of goods error problems, the company is not responsible for! Thank You for Your Cooperation!!!

Buyers receive special instructions:

Express responsibility will only need to send express delivery, does not bear the authenticity of the product package responsibility, parcels must be signed in principle to open inspection

Two. Buyers in the sign before fast, please carefully check whether the packaging Kaifeng, serious damage to the body, whether the weight is normal, if there is abnormal, can refuse to sign

Three. The buyer in receipt of shipment, please not to express single sign will face, first opened the package check inside items, there is no bad, if there is damage, and courier express negotiation will be returned, and on the surface of single sign indicating shipment has been damaged, return the signature obliterated

Four. In the courier left, found that the shipment be opened, or has been damaged, express will not recognize, so the sign, we must carefully check the instructions, in strict accordance with the previous two

Five. If you find the quality problems found in our company, we will exchange it unconditionally. But in return for the size, color is not suitable for non quality reasons for application, we will deduct the delivery of freight, such as replacement application because of non quality problems, will be borne by the buyer all shipping goods.

Six. We do our best to serve the buyers. Let buyers buy assured. Use comfortable. Hope buyers can enjoy shopping in our shop!

After sale:

If you feel satisfied with our service, please give me a praise ^ ^, if there is no place to meet, please inform our company, in order to give you timely treatment, do not have any contact in the case of given negative feedback in the comments or, while doing your problem has not been resolved, and the negotiation we will give you a satisfactory answer!