Menu

Connect with us

YSFM10x1.0PYSFM12*1.0PYSFM12*1.25P full range of Taiwan tin lock screw

The locking way is to use the elasticity of the steel itself to lock in the axial direction and force the locking. In particular, the locking ability of the product is more than 3 times as much as that of the traditional nut, especially for the occasions where the working environment is bad and the nut is easy to loose. Because of the assembly error, the locking method of YSK design can not guarantee the vertical deflection of plane and thread as its shortcoming

price:USD$51.00
discount 70% in 2018-09-20 to 2018-09-22
price: USD$ 35.70
freight :USD$18.00,(Express)
freight :USD$7.00,(Postal parcel)
views:0
Search Similar or mail to saler or send message to saler

Pay with PayPal, PayPal Credit or any major credit card

The nuts sold in this shop are complete and welcome to consult. TEL:13670029149

The tin lock nut has 4 locking ways

1, YSF abdominal locking type:Lock mode for half angle of thread angle of 30 degrees, three point lock; this product is the standard products of the company, its excellent lock design, can make the thread fixed on copper, completely fit in the male thread, the locking effect because of the design of the pink of perfection 30 degrees angle, reduced due to lock screw the resulting torque. (if the force distance exceeds axial load)
2, YSA axial lock type:
The locking mode is axial three point locking. Its thickness is the same as that of the YSF series, and the axial three point locking is its characteristic, which is restricted by the special environment used in the assembly work.
3, YSR radial locking:
For the three point radial lock mode locking, the thickness is thin compared to other products, suitable for nut thickness of space is limited, can not use other products.
4, tightening the locking type YSK:
The locking way is to use the elasticity of the steel itself to lock in the axial direction and force the locking. In particular, the locking ability of the product is more than 3 times as much as that of the traditional nut, especially for the occasions where the working environment is bad and the nut is easy to loose. Because of the assembly error, the locking method of YSK design can not guarantee the vertical deflection of plane and thread as its shortcoming