Connect with us

Japan imported YAMAWA tap, stainless steel screw machine for special use of wire tapping M3M4M5M6M8M10M12M16

Stainless steel machine taps SU+SP = stainless steel spiral groove, stainless steel imported taps, the quality of the upper layer, the economic support of the manufacturers recommend to choose, a better imported taps, dispensers recommended.

discount 70% in 2018-09-22 to 2018-09-24
price: USD$ 261.10
freight :USD$18.00,(Express)
freight :USD$7.00,(Postal parcel)
Search Similar or mail to saler or send message to saler

Pay with PayPal, PayPal Credit or any major credit card

If you like us, not as good as youCollectionLet's go!

Click on the picture below to collect Oh ~!

More tools, please clickUncle Taobao shop

West toolsWelcome you ~!

Japan is making and production.
Stainless steel spiral taps, code SU-SP (SU+SP), genuine. PS:M6 below SU+SP, M8 above SU-SP, M2.6 below spiral angle is 50 degrees, M3 above spiral angle is 45 degrees. When the screw tap is used, the chip can be discharged from the hole behind the hole, which can avoid the chip clogging in the hole and cause the wire attack damage. This product is a special spiral stainless steel, chromium molybdenum alloy steel tap, has excellent machinability of materials with viscosity, this product by oxidation treatment, the surface of black, suitable for steel alloy tapping, surface oxide film can produce a solution decreases with taps of material, avoid the tool knife tumor. (for 316, 317 and other difficult to process stainless steel or some hard work)
Screw tapping accuracy level:Class YAMAWAP
Material for screw tapping:HSS-E
The number of teeth eaten by cutting edge:2.5 teeth
Suitable for being cut wood:Tensile strength below 750N/mm2 stainless steel, carbon steel, copper, alloy steel, cast steel and so on
P precision description of YAMAWA tap:
The P accuracy of YAMAWA taps is formulated in accordance with the specification TAS of the Japan tool industry association.
When the tap pitch is 0.7mm or above, tap in diameter reference size to 0 basis points, precision tolerances at each level is 20 m, which is effective precision tolerances to P1 levels (+0, +20, m and so on), grade P2 (+20, +40), grade P3 (+40, +60), grade P4 (+60, +80). When the tap pitch is 0.6mm or below, the tap diameter reference size to 10 m as a reference point, precision tolerances every 1 levels for 15 m, which is effective for stage P1 tolerance (+10 m, +25 m), and so on, grade P2 (+25, +40). Grade P3 (+40, +55), grade P4 (+55, +70).

Note: our shop defaults to standard thread accuracy, increase the size of thread accuracy, please contact the owner. (generally used for the use of electroplating or tapping after the reduction of materials, and easy to cause severe wear of hard cutting thread tapping processing).

OK, please look directly at the real map before shopping

< below for the owner of the racketJapanese YAMAWATheM4×0.7/M5×0.8Special spiral tap for stainless steelThe selection of the physical map - hope to be able to give a kiss before shopping can feel the real map >

More boutique tools, please click:

Thank you、Have your choice,Go farther!




Beep. My shop.

~ I am a reminder card ~!At the time of deliveryPlease check the parcel in front of the courier/Confirm and sign again/If the package is damagedOr affect the number of babies or notPlease refuse to signContact the owner immediatelyOtherwise, the problems caused by logistics linksWill not be able to investigate the responsibility of courier companies as well as our consignor's responsibilityWe can only take the related losses ourselves/For your own benefit, please be careful ~!


Yesterday, you and I were passers-by,You are my guest todayTomorrow we are friends.

And cooperate and cherish and go hand in hand


just want to give you the best service .
just want to give you the best care .
just want to give you the best quality .


If you like us, better to collect us ~!

Click on the picture below to collect Oh ~!

  Uncle Taobao shop
West toolsWelcome you ~!