Connect with us

Short 16mm metal button switch, self locking waterproof ring LED lamp, flat head 27.5mm

discount 70% in 2018-09-22 to 2018-09-24
price: USD$ 10.50
freight :USD$18.00,(Express)
freight :USD$7.00,(Postal parcel)
Search Similar or mail to saler or send message to saler

Pay with PayPal, PayPal Credit or any major credit card


Baby of this paragraph10Except for remote areasXinjiang, Tibet, Qinghai, Ningxia)、Hongkong, Macao and TaiwanBecause the postage is too high, don't mail, please refer to our customer service for details, express mail only limit:RhymeIf you need to send other express, you need to increase the freight, please contact our customer serviceThank you

Please read the following carefully before buying so as to avoid mistakes!

The difference between button switch, reset and self lock:

1. reset button, refers to the next power, let go automatically rebound, power off.

2. self locking button, refers to the lock after going down, continue to power, and then click the rebound, power off!

Please carefully look at the title is reset button, or self-locking button, so as not to buy wrong!

Please note the color and voltage of the lamp, no note, default 12V random color.

Special statement: Metal buttons, pins, if you do not match the terminal, or socket, and other welding, you need to complete a foot welding work within 3 seconds, otherwise overheating will burn inside accessories, this situation is man-made damage, no return, no exchange, remember, remember!In addition to remote areas, 10 from the mail

The following is a wiring mode with a lock switch

Take 16MM five foot buttons as an example, the 2 one is connected with lights, the other 3 are normally open, normally closed and common points

1, the two terminals of the lamp have positive and negative poles (+ and -) marked out, LED lights in the case of power, regardless of the switch on and off lights are bright.

2, the middle three C1 pin input common. Nc1 is normally closed. N01 is often developed. The button can be freely selected for opening or closing

Because the light and the control are independent, there are two ways to connect them:

1.The lamp can be connected to the normally bright, +, - connected to the positive and negative pole of the 12V power supply. Control can choose C, NO or C, NC. No matter the switch is on and off, the lights are bright.

2. lights can also be connected to the button to control, that is, when the button is on, the lights are on and off when the lights, see the picture below.