discount 70% in 2018-09-21 to 2018-09-23
price: USD$ 238.00
freight :USD$7.00,(Postal parcel)
Search Similar or mail to saler or send message to saler
Cylinder, swing folding cylinder classification linear motion reciprocating motion of the swing cylinder, gas claw. The folding cylinder structure of Simaite  is composed of a cylinder, cylinder cover, piston, piston rod and sealing parts, the internal structure as shown in Figure 1) principle: SMC cylinder cylinder cylinder diameter size represents the size of the cylinder output force. The piston to do reciprocating sliding smoothly in the cylinder, cylinder surface of cylinder surface roughness should reach Ra0.8um. The steel cylinder, the inner surface should be hard chrome plating to reduce friction and wear, and to prevent corrosion. The cylinder material in addition to the use of high carbon steel pipe with high strength, or Aluminum Alloy and brass. The small cylinder has the use of stainless steel tube. A cylinder with a magnetic switch or used in the corrosion environment of cylinder, the cylinder should be used Aluminum Alloy or stainless steel, brass and other materials. SMCCM2 on a cylinder piston using bidirectional combined seal ring seal, piston and piston rod with riveted links, without nuts. 2) cap end cover is provided with an exhaust port, and some are still the end cover is provided with a buffering mechanism. The rod side of the end cover is provided with a sealing ring and a dustproof ring, to prevent outward from the piston rod at the leak and prevent external dust mixed with the cylinder. The rod side of the end cover is provided with a guide sleeve, in order to improve the orientation precision of cylinder, horizontal loading amount of piston rod, reduce the bending amount of piston rod extends, prolong the service life of the air cylinder. The guide sleeve is usually sintered alloy, with copper casting. The end cap used malleable iron, to reduce weight and rust, often used Aluminum Alloy die-casting, micro cylinder used brass materials.