discount 70% in 2018-09-17 to 2018-09-19
price: USD$ 87.50
freight :USD$7.00,(Postal parcel)
Search Similar or mail to saler or send message to saler
The factory specializing in the production of tungsten steelAlloy products, GermanyMaterial imported from Taiwan,Advanced equipment, advanced technology, excellence, stable quality, durable wear, suitable for rough machining to finish machining, high finish. With a large number of tungsten steel milling cutter stock, processing hardness:HRC45HRC50 HRC55 HRC65The following products: (0.5MM-20.0MM) a ball end cutter knife round nose special aluminum knife knife, small diameter tungsten coated steel cutter. Length is divided into standard length,50MM、100MMLengthen150MMAll specifications are available.According to customer drawings, samples for production of imported tungsten steel alloy non-standard, chamfering cutter milling cutter and reamer cutter center drill tool PCD plug type T drilling and milling cutter blade welding tool and tool grinding stone can be based on customer product design tool customer is the growth of the enterprises, quality is the life of enterprise development, I plant as a guide welcome new and old customers to call to consult, order
Excellent quality, exquisite cutting tool is your preferred products
There are a large number of specifications of no brand milling cutter, you can build your own brand cutter manufacturers
direct dealUndertake large and small orders
Tips for using knivesIn order to obtain better cutting surface and prolong tool life. Be sure to use fixtures with high accuracy, high rigidity and good dynamic balance.
1.Before using this tool, the tool deflection is measured and the tool deflection accuracy is exceeded0.01MMPlease correct and then cut.
2.The shorter the length of the tool chuck, the longer the tool's protrusion is, the lower the speed, the feed rate or the amount of cutting.
3.In case of abnormal vibration or sound during cutting, the spindle speed and cutting amount should be lowered to improve the situation.
4The cutting method depends on the workpiece, machine and software. The above data is only for reference. After the cutting condition is stable, the feed speed will be increased30%~50%。