Menu

Connect with us

Jacket jacket vortex flowmeter DN65mm-2.5 inch field display battery powered hot oil / steam insulation

The flowmeter is suitable for measuring easily crystallized media, ordering products, the supply cycle is 5-7 days.

price:USD$3680.00
discount 70% in 2018-09-22 to 2018-09-24
price: USD$ 2576.00
freight :USD$18.00,(Express)
freight :USD$7.00,(Postal parcel)
views:0
Search Similar or mail to saler or send message to saler

Pay with PayPal, PayPal Credit or any major credit card

Jacket type flowmeteryesIt is easy to solidify at room temperature,At a certain temperatureA medium that is easy to condense and crystallizeIn the pipeline internal energy transmission and flow detection, it is often necessary to heat the medium in the system pipe, so that the medium is dissolved and kept warm. For this reason, our company designed a standard flowmeter shell to increase the insulation jacket in vitro, availableHot water, hot oil or below200℃ SteamThe heat preservation jacket is adopted to dissolve the solidified medium in the flow meter and maintain a certain temperature, so as to ensure the normal operation of the flowmeter.

 

High temperature and high viscosity belt jacket flowmeter is generally applicable:1High temperature media2High viscosity media3When the medium is easy to crystallize at low temperature or the viscosity is too viscous (large), it needs to be heated and diluted.

Product characteristics and parameters:

1The heat preserving flowmeter can accurately measure the flow of various fluids in a wide range of flow without being affected by the physical properties of the fluid.

2Thermal insulation flowmeterNot affected by temperature, pressure, and not easy to block, not easy, not easy to fouling, high temperature, high pressure, safety explosion-proof, suitable for harsh environment.

3The heat preservation flowmeter has no movable parts and no hole gap design. The product has no abrasion, dirt resistance, no mechanical maintenance and long service life.

4The heat preservation flowmeter adopts micro power consumption high and new technology, and the battery powered field display flowmeter can continuously run for more than two years.

5Insulation type flowmeter: made of stainless steel material, can be applied to the measurement of corrosive medium.

6Measured fluidpressure0-1.6MPa Temperature:250Below centigrade

7Accuracy:1Class,1.5Class,0.5level(It can be achieved by nonlinear trimming0.5level); 

8Repeatability: indicated value0.2%; 

9And body material:ICr18Ni9Ti; 

10Pressure loss: Delta=1.2×r×V2×10-6 Type: DeltaP-pressure lossr-Measured fluid density(Kg/m3) v-Mean flow velocity in pipe(m/s) 

11Ambient temperature:-20℃~+55(Special requirements ordering instructions

12Environmental humidity: less than or equal to90%RH 

13Atmospheric pressure:86-106KPa 

14External power supply:24VDC 

15Internal power supply:3.6Vlithium battery

16Work power supply:80/A 

17Distance of signal transmission:1000

18Signal output: pulse output(External power supply)Current output420mADC(Two wire system for external supply24VDCPower Supply)The pulse output and current output can only be chosen one way.