discount 70% in 2018-10-21 to 2018-10-23
price: USD$ 62.30
freight :USD$7.00,(Postal parcel)
Search Similar or mail to saler or send message to saler
Characteristics of ATA battery products:
1. a thick plate makes the battery live longer
2. flame retardant one-way exhaust valve makes the battery safe and has long life
3. durable polypropylene (PP) battery tank cover, the heat sealing of the tank cover can prevent leakage
4. adsorption glass fiber technology makes gas composite efficiency as high as 99%, so that the electrolyte has no maintenance function
Authentication of 5.UL
6. multi cell battery design makes battery installation and maintenance more economical
7. can be used in any direction. The vertical, lateral or side position
8., in accordance with the International Air Transport Association / special provisions of the International Civil Aviation Organization A67, Suzhou ATA battery company can be put into operation
9. can be transported on the ground without hazardous materials, and can be transported by water without dangerous materials
10. low calcium lead alloy grid designed by computer, the doomsday reduced the amount of gas generated, and can be easily recycled.
The service life is long
The lead alloy plate added with rare earth element is used to make the plate, and the positive plate rib is strengthened. The service life of the battery made by the plate can be increased by 25%, and the corrosion resistance of the plate is also greatly enhanced,
The use of advanced production equipment and manufacturing process with perfect quality management system, strict control of product realization of each process, to avoid the fault of battery and false welding and weld may appear in the transport and use of. The consistency of the battery internal resistance is very good, so as to ensure the balance of the parallel use of multiple groups of batteries.
Safety is high
The high efficiency safety valve made of imported rubber is adopted. The action is durable, anti-aging and corrosion resistant. It effectively ensures the safety of the internal pressure in the process of using the product.
Low self discharge rate
The self discharge rate of the battery can be effectively reduced by using special analytical pure electrolyte and reasonable configuration of special additives:
Low internal resistance
The unique superfine fiber separator can effectively extend the reaction surface of the positive and negative plates, thus greatly reducing the internal resistance of the battery, and ensuring the phenomenon that the internal resistance of the battery will not rise due to the fatigue resistance of the separator. In addition, the assembly pressure is strictly controlled during the filling process, which can effectively prevent the abnormal increase of the pressure of the polar group after the acid injection, resulting in the abnormal increase of the internal resistance of the battery during use.
Green environmental protection
The use of advanced layered sealing technology, 100% battery acid leakage, eliminate acid leakage, prevent mist affect the equipment and environment
1 、 maintenance free
Unique gas recombination technology (GASRECOMBINATION) is adopted. No need for regular fluid maintenance, reduce user worries.
2, high safety and reliability:
The automatic opening and closing safety valve is adopted to prevent the external gas from being sucked into the inner of the accumulator, and the performance of the accumulator is destroyed, and the abnormal internal pressure caused by the gas generated by charging is prevented, so that the accumulator is destroyed. The battery has not closed in normal float under discharged electrolyte and acid mist, harmless to the human body.
3, long service life:
20 degrees in the environment, LC-R series of small sealed battery floating life up to 3 years, LC-R stationary sealed batteries floating life up to 6 years, GFM series battery floating life up to 8 years,
4, low self discharge rate:
The high quality lead calcium alloy can reduce the self discharge rate of the battery, and the Kstar battery can be used in 6 months without adding electric energy in 20 months.
5. Strong ability to adapt to environment:
It can be used at ambient temperature of -20 ~ +50 C, suitable for desert and plateau climate.
1, the battery has a strong ability to resist deep discharge, and it can still be connected to the load after 100% discharge, and the capacity can be recovered within four weeks after charging.
2, because the battery is colloidal solid, so the electrolyte concentration is uniform, there is no acid layering phenomenon.
3, the acid concentration is low, the plate corrosion is weak, and the use of unique tubular plate, so the battery life is long.
4, the battery plate adopts antimony free alloy, the battery self discharge electrode is low. After 50% years of storage at 20 degrees C, there are more than two capacity, that is, no additional power in two years.
5, super strong withstand deep discharge and high current discharge capacity, with overcharge and over discharge self-protection performance.
6 gel electrolyte, no internal short circuit. The heat capacity is large, the heat dissipation ability is strong, and the thermal runaway phenomenon is easy to be avoided, so the operation is very reliable in high temperature operation, the battery does not produce "drying" phenomenon, and the working temperature range is wide.
7, the use of high sensitivity low pressure umbrella type valve (German SunShine Co patent), so that the use of batteries safer and more reliable.
8, the use of multi layer acid resistant rubber ring sliding seal (German SunShine Co patent), to ensure the service life of the late pole sealing performance when growing.
1. switch sequence
In order to avoid the impact current produced at the start of the loadUPS power supply is damaged, in use, should first supply the UPS, so that it is in the bypass work state, and then open the load one by one, so as to avoid the load current impact on UPS, so that UPS service life can be extended. The shutdown sequence can be considered as the reverse process of the startup sequence. First, the load is closed one by one, and then the UPS is turned off.
2. before starting
Before starting, you need to confirm the polarity of the input power line correctly, so as to ensure personal safety. The total power of the load should not be greater than the total loadRated power of UPS. UPS should be avoided to work under overload to ensure UPS work properly.
3. after shutdown
After the interruption of power supply,UPS powered by the battery pack and automatically shut down, do not use the UPS battery power to boot, so as to avoid damage to the battery due to excessive discharge. When the abnormal power supply turns into UPS battery power supply, the load should be closed and shut down in time. When the power supply is restored to normal, the power will be switched on again.
4. use environment
Similar to the working environment of the computer,The environmental temperature requirement of UPS is also not very high, and it can work normally at 0 ~40. But dust problems also plague UPS. UPS uses clean, dusty, dry, dusty and humid environments that cause UPS to work abnormally. The UPS battery has higher temperature requirements, and the standard temperature is 25 degrees. It is better not to exceed the range of 15 ~30 C in normal time. Too low temperature will not only reduce the capacity of the battery pack, but also further affect the service life of UPS. In addition, UPS antimagnetic ability is not very good. So you shouldn't put a strong magnetic object on the UPS, otherwise it will cause the UPS to work abnormally or damage the machine.
5. battery maintenance
UPS battery group will have the phenomenon of self discharge, if not put into use for a long time will lead to damage to the battery, so the need for regular charging and discharging. If you are using the electrolyte absorption system of battery maintenance free, will not produce any gas in normal use, but if the user caused by improper use of the battery overcharge will produce gas, and increase the pressure within the stack, which will make the battery drum up, deformation, leakage or even rupture, user if it is found that this phenomenon should replace the battery immediately.
6. pay attention to safety
BecauseUPS battery voltage is very high, there is a certain risk of electric shock to the human body, so in the loading and unloading of conductive connector and output line should have security, the tools should be insulated, especially the output contact, should have the prevention of electric shock settings. Maximize the satisfaction of more users. This is the UPS power supply enterprises need to pay attention to user complaints and feedback is one of the important reasons, only pay attention to user complaints and feedback, can in the shortest possible time to know the needs of the users and the feedback on products, in order to identify the problem, improve the product, to a greater extent to meet more users.
Pay attention to user complaints and feedback twoDo not let the user disappointed, do the user life and work of a small assistant
The function of UPS power product is destined that the user will believe that the product will begin to use its product. When we work with computers, if the electricity is abnormal, the UPS power will last a certain amount of time to power our computers, so that we have time to deal with the work of the skilled players, to prevent the loss of work documents, improve our work efficiency. If we are not perfect, not timely processing of user complaints and other common user feedback, there are also some problems in the process of using, it will cause great inconvenience to the user; the user of products not only disappointed, also on the user's work caused a lot of trouble. Therefore, UPS power supply enterprises must pay attention to user complaints and feedback, so as to know the product and the needs of most users, users to become the life and work of the assistant for the purpose, and constantly update and improve the product.
UPS supply many brands, only for the sake of users, pay attention to user complaints and feedback, and constantly improve the product, and satisfy more users in order to win the trust of users; only pay attention to the quality of products can be abnormal when occurred in the city, to bring the real help, users become the most intimate.