discount 70% in 2018-10-22 to 2018-10-24
price: USD$ 27.30
freight :USD$7.00,(Postal parcel)
Search Similar or mail to saler or send message to saler
Commodity code 
Application: the aluminum plastic pipe used for 1216/1620/2025 must not turn flat when turning.
Material: square steel wire
Spring size for external use:
1216 (used for outer diameter 16mm inner diameter 12mm aluminum plastic pipe), length 34cm, heavy 233g;
1620 (for aluminum tube with outer diameter of 20mm 16mm) length 36cm, heavy 339g;
2025 (used for outer diameter 25mm inner diameter 20mm aluminum plastic pipe), length 32cm, heavy 363g
Use: plastic pipe bend range should not be too large, otherwise it will directly bend aluminum pipe. If the spring is inserted again, the problem of bending and damaging the aluminium plastic pipe can be avoided.
Length specification of inner spring:
1216 (4 points) length (50.5cm) single weight (174 grams), outer diameter 11mm, used for 1216 aluminum plastic pipe bending
1620 (6 points) length (49.0mm) single weight (238 grams), outer diameter 15mm, used for 1620 aluminum plastic pipe bending
2025 (1 inches) length (40.0mm) single weight (344 grams), outer diameter 19mm, used for 2025 aluminum plastic pipe bending
Usage: insert in the aluminum plastic tube to bend the place, slowly pull to the angle you want, and then take out the spring.
If you need to bend in the middle part of the tube, you can plug a hard wire at the end of the spring, then insert the spring into the part that needs to be bent, and then pull out the spring after bending
[tyt] ZJ0gXtP1m0N8DOpZO+ZMI4E/zhXJm0uz6LZXCkPJxfvwb/O7JX8eHY1+//aAXgRQ2cgOpAg2o7UwdxV8llDKkYTyMnY= [/tyt]