Connect with us

Carved stone carving electroplating electroplating grinding pen shaped emery grinding head 6 to handle lettering

discount 70% in 2018-09-20 to 2018-09-22
price: USD$ 73.50
freight :USD$18.00,(Express)
freight :USD$7.00,(Postal parcel)
Search Similar or mail to saler or send message to saler

Pay with PayPal, PayPal Credit or any major credit card

 刻字笔描述2015-10-18_01.jpg 刻字笔描述2015-10-18_02.jpg 刻字笔描述2015-10-18_03.jpg 刻字笔描述2015-10-18_04.jpg 刻字笔描述2015-10-18_05.jpg 刻字笔描述2015-10-18_06.jpg 刻字笔描述2015-10-18_07.jpg 刻字笔描述2015-10-18_07.jpg 刻字笔描述2015-10-18_08.jpg 刻字笔描述2015-10-18_09.jpg 刻字笔描述2015-10-18_10.jpg 刻字笔描述2015-10-18_11.jpg 刻字笔描述2015-10-18_12.jpg 刻字笔描述2015-10-18_13.jpg 刻字笔描述2015-10-18_14.jpg

 刻字笔描述2015-10-18_15.jpg 刻字笔描述2015-10-18_17.jpg 刻字笔描述2015-10-18_18.jpg 刻字笔描述2015-10-18_19.jpg 刻字笔描述2015-10-18_21.jpg

 Product introduction:

The electric lettering device is a new type of lettering instrument. The product is small, light, easy to carry and easy to use. Favored by the vast number of consumers. It can not only play a role in classification research and industrial production, but there are still widely used in commercial and home field, in the process of the production, writing also has its unique use. The instrument provides a rapid, easy and permanent marking method for materials. It can engrave and engrave on almost all the materials of metal, ceramics and wood.

Mechanical principle:

The forced vibration (up and down vibration) is driven by the periodic characteristics of alternating current to drive the work of the NIB.So in the process of work will produce a certain volume can be accepted (this principle of the lettering pen has a certain volume), so the sound allergy pat!~

Usage method:

Tilt slightly as you write with your pen(45About degree),And put your hands on the table,Don't press down hard.,A little slower than usual.Through adjust the stroke can be adjusted.,By repeatedly writing master its performance,In order to meet the needs of different materials. The font size and depth.

Matters needing attention:

Continuous work should not exceed 20 minutes, in order to avoid damage to the coil, intermittent use to ensure the life of the body, the chassis should be cooled after heating in use, without use, please turn off the power supply!