Connect with us

Energy saving home and car electric pump, air pump, home vehicle electric charging pump, 212 air pump

discount 70% in 2018-07-21 to 2018-07-23
price: USD$ 65.10
freight :USD$18.00,(Express)
freight :USD$7.00,(Postal parcel)
Search Similar or mail to saler or send message to saler

Pay with PayPal, PayPal Credit or any major credit card


@ important matters @

* the pump power supply voltage must be AC 220V-240V, 12V vehicle.

* this is a kind of efficient pump. The pump is used to inflate the gas boat and the air mattress.

Prevent children close to the pump.

You don't stop filling the air inlet and the air outlet, so as not to hinder the work effect of ventilation, air pump.

It should be based on the inflation inflation valve size, the gas nozzle is appropriate to shorten the work time, air pump.


1, when inflating

It is 220V volts AC power or 12V vehicle power supply. The accumulator pump does not need to connect the power supply.

When the gas is inflated, the air inlet is connected with the interface and the air mouth, and then the air charging valve is inserted, and the charging is started according to the starting switch, and then the switch is stopped according to the end. ("-" means "open", "O" means "pass")

* inflatable, inflatable valve is not required special attention should be paid to the inflatable products is blocked, so as not to damage the pump overheating.

* disable inflatable exhaust cover, for large inflatable boat or air bed, the pump should be aligned directly the inflation valve inflatable to speed up its inflation rate, but for the small valve inflatable products, you must use the appropriate gas nozzle.


2, exhaust time

Open the air valve to vent.

It will exhaust vent cap connected to the exhaust port, and then directly connected with the gas nozzle and then insert the charging valve, press the start switch to exhaust, after press the stop switch.

* when the exhaust valve can not inflatable should pay special attention to the desired inflation product is blocked, so as not to damage the pump overheating.

* for inflating valve is small, can hold the valve sheet in the open air circulation finger.

* for the spiral gas nozzle if inflate quickly, first open the safety, the safety directly inflated by mouth, after full, the safety lock, and then replaced by the upper cover port directly charging; exhaust, open the safety can directly exhaust.