Connect with us

FSM-21SFSM-22S four motor imported from Japan's optical fiber splicer, fiber melting machine, imported warranty for three years

discount 70% in 2018-09-21 to 2018-09-23
price: USD$ 8050.00
freight :USD$18.00,(Express)
freight :USD$7.00,(Postal parcel)
Search Similar or mail to saler or send message to saler

Pay with PayPal, PayPal Credit or any major credit card


Fujikura21S palm single core fiber splicer

Manufacturer: Manufacturer

Origin: brief introduction of Japan

Tokura's new 21S handheld single fiber fusion splicer is a FTTH can be used for engineering, but also can be used for fiber trunk engineering continuous high performance welding machine. The design of 4 type of motor core, can better adapt to the surrounding environment at the construction site of the complex, greatly improving the connection success rate and quality, but also reduces the cost of your investment. In addition, with a small portable shape of 21S, is also a good helper for on-site installation of personnel to ease the burden.


The world's smallest and lightest 4 motor movable V groove core fusion machine

Handheld design, with battery only 1140 grams

Fusion time 7 seconds (standard SM optical fiber)

High precision and high strength design, shock resistance, rain resistance, dust resistance

Three in one multifunctional sheath press plate, more convenient operation

The shortest cutting length welding of 5mm

Large capacity lithium battery power supply, a battery can be welded, heating more than 200 cores

Equipped with multifunctional suspension table

Whenever and wherever possible, as soon as the open portable box can be opened, the welding operation can be carried out immediately

technical parameter

Alignment of active V groove cladding with fiber alignment method

They are suitable for optical fiber types SMF (G.652), MMF (G.651), DSF (G.653), NZDSF (G.655), BIF (G.657)

Application of optical fiber type 250 m inner core rubber insulated wire cable; 250 m core / pigtail jumper; 250 m and 600 m/900 bare fiber m coated fiber

The cladding diameter is 125 m

Coating diameter of 100 m to 3mm (multifunctional sheathing board, no need to replace the fixture)

Optical fiber cutting length 5~16mm

There are 100 welding modes and 30 heating modes in the welding / heating mode

The average average splice loss is 0.02dB (SM), 0.01dB (MM), 0.04dB (DS), 0.04dB (NZDS)

Fusion / heating time fusion standard SM optical fiber 7 seconds, heating standard FP-03 (60mm) heat shrinkable tube 30 seconds

The weld results store 10000 latest records and 8 latest weld images

Optical fiber display and amplification X/Y single or simultaneous display; 200 times /400 times

Optical fiber observation method biaxial observation; 4.73 inch color LCD display (surface impact resistant transparent protective plate)

Tensile test 1.96~2.25N

The corresponding heat shrinkable tube 60mm single core, single core, single core 40mm 20mm and all kinds of indoor cable and connector casing using hot melt

Electrode rod life discharge 3000~5000 times

Battery heating times 4300mAh lithium battery, more than 200 times

Power supply 100~240VAC (50~60Hz)

The communication interface USB2.0 (Mini-B) is used for PC connections to support Internet networking software upgrades

The operating conditions are altitude 0~5000m, maximum wind speed 15m/s, temperature -10~+50 C, relative humidity 0~95% non condensing

Size / weight 120Wx189Dx72H (mm) /1140g (including battery)