Package 1:936A manufacturers standard (host + handle + iron tip + iron seat + sponge)
Package 2:936A manufacturers standard (host + handle + iron tip + iron seat + sponge) + iron head four sets (knife head + horseshoe shape + round head + one font)
Package 3:936A manufacturers standard (host + handle + iron tip + iron seat + sponge) + standby heating core + spare iron head 5
Package 4:936A manufacturers standard (host + handle + iron tip + iron seat + sponge) + standby heating core
The manufacturer's standard package 5:936A (host + + + iron handle pointed iron base + sponge + iron head) four piece (knife head + + + in a horseshoe shaped head) + + rosin flux
The manufacturer's standard package 6:936A (host + + + iron handle pointed iron base + sponge + iron head) four piece (knife head + + + in a horseshoe shaped head) + + + backup heater tin wire + + rosin flux in all of a curved straight forceps
Package 7:936A manufacturers standard (host + handle + iron tip + iron seat + sponge) + tin wire + iron knife head + soldering flux
The handle is particularly light, long time use, never feel tired.
The heating body is made of imported temperature resistant material and advanced technology. The service life is long, and the cost of replacing the heating body is low.
Heating system uses low voltage DC power supply to ensure the anti-static, no leakage, no interference.
Split design, easy to place.
Temperature setting at 200 ~480 C, temperature control is stable and accurate.
Welding nozzle (soldering iron head) and international brand, and according to the user's different working conditions, optional with each welding nozzle.
The welding platform is made of conductive material, so as to achieve the real anti-static.
Note: the general use should not exceed 380 degrees centigrade. A short period of use is allowed if you need to use a higher temperature.
2. temperature lock
Temperature setting to proper temperature.
Tighten the locking screw clockwise with the screwdriver under the temperature knob until the temperature setting knob does not move.
When the temperature is reset, counterclockwise rotating screwdriver loose locking screw.
The reason why the 3. iron head does not touch tin
The temperature of the iron head is more than 400 degrees centigrade.
The soldering tin is not given to the soldering iron head.
Lack of soldering flux in welding, tin removal, repair, repair welding, etc..
The iron head in high sulfur content or wipe dry sponges and rags.
Contact with organic materials such as plastic, silicon (silicon), grease and other chemicals.
Use solder which is not pure and low tin content.
Replacement and treatment of soldering iron head
The iron head can loosen the sleeve removed. The temperature control table power must be turned off, and the iron head is cooled down, then the lower iron head can be removed, and the oxide dust formed in the fixed position of the sleeve can be removed. Care must be taken to avoid the dust coming into the eyes. Replace the iron head and lock the sleeve with the power of the normal hand.
When the new iron core is replaced, the iron core should be extended out of the stainless steel pipe 23mm, and then the screw core installation screw in the handle is locked
Note: you must be careful not to lock too tight, otherwise you will damage the heating body.
The iron grip or temperature control shell can be cleaned with a small amount of liquid detergent.
Please do not immerse the temperature control station into the fluid or let the liquid flow into the shell.
Please do not use any solvent to clean the shell.
Brand new iron head
Change the soldering iron head, please use the Antai 900M series or choose the imported 936 iron head.
When you use a new iron head at any time, please use the following steps, which will greatly prolong the service life of the iron head.
The temperature control knob to set the low position. Turn on the power switch".
The heating at 200 DEG C, the iron head tin tin wire surface containing flux.
The continuous heating at 200 DEG C for five minutes, then the temperature control temperature to a proper position button.
The arrival of the appropriate temperature, you can start using.
Note: when you use a new iron head at any time, it is better to remove the iron head and clean the internal foreign body every day!
Correct use of iron
Soldering iron grip: A / low temperature iron: hand holding pen writing. B high temperature iron: finger down grip.
The ideal angle between the iron head and PCB is 45 degrees centigrade.
Iron head should be kept clean.
Use hand soldering iron heater.
Strictly prohibit the use of iron (e.g., using iron head to strike hard objects).
Maintenance of iron head
In order to ensure that the temperature control iron works well and normally, please pay attention to the following suggestions. (if the iron or some factors caused by the temperature control station service support services, please contact the most close to the function of the operation is not normal,). The iron heads supplied are all alloy heads, and if used properly, they will have a longer service life.
The disabled before shutdown in the iron head tin surface and a suitable amount of tin, only before welding cashi.
Don't let the iron head stay too high for a long time, easy to make the surface of the iron head plating layer crack.
In welding, do not give the iron head too large pressure friction spot welding, this process will not change the thermal conductivity, but will make the iron head damage.
- never clean iron head with a rough material or file.
If the surface has oxidation of tin, as needed, you can use 600 to 800 to be careful and clear the emery cloth friction with solution B propanol or equivalent, heated to 200 DEG C immediately? Le Cheng Yuan turn Cheng Tun?
Don't use chlorine or acid high flux. Fluxes only using synthetic resins or already active resins.
Note: every 24 hours or at least once a Monday, remove the iron head, clean and remove the foreign body in the sleeve.
When the power is switched on, the temperature of the iron head is in high temperature. In view of abuse may cause burns or fire, please strictly abide by the following items:
Never touch the metal part near the iron head.
Never use the iron head near flammable objects.
Inform others of the workshop that the iron head is easy to burn and may cause dangerous accidents. The power should be switched off after the rest or after completion.
When replacing the parts or devices, the iron head should be turned off and the iron head should be cooled to room temperature.
In order to avoid damage to welding table and operation environment safety, the following items should be observed:
This product uses three wire grounding plug must be inserted into three grounding socket. Do not change the plug or use the ungrounded three adapter to make the grounding bad.
If you need to extend the wire, please use the ground three wire power line.
Never use the iron head for welding other than welding.
Never strike the soldering iron on the worktable to remove the residual. This may cause serious damage to the iron.
Never change the electric welding table without permission.
Never wet the welding table or use the welding table when the hands are wet.
It will smoke when welding, and the workshop should have good ventilation facilities.
The use of welding station without any damage may hurt the body or object being.