Connect with us

Europe and America star purifier 4 points tap water pipeline pressure reducing valve, pressure reducing valve to reduce water pressure valve

discount 70% in 2018-09-23 to 2018-09-25
price: USD$ 19.60
freight :USD$18.00,(Express)
freight :USD$7.00,(Postal parcel)
Search Similar or mail to saler or send message to saler

Pay with PayPal, PayPal Credit or any major credit card

[product name]

The 4 part screw type valve, mainly installed in front of the water purifier, the water pressure is too large, and the damage of water purifier.

[functional characteristics]

The valve series of the company by the spring structure, solve the problem of common valve pressure more jitter to solve the common valve seal aging problem, the valve can work smoothly, and prolonging service life, convenient installation, safe and practical.

Low water pressure will not reduce the water pressure; when the water pressure is high enough, the pressure reducing valve can be really applied.

RO system: to prevent the "water hammer", extend the life of the system, reduce the Water Leakage fault, the system of water pressure fluctuation is smaller, but also reduce the pressure fluctuation of the connecting hose, joint impact, also reduce pressure fluctuation of the diaphragm (pressure switch, solenoid valve) impact.

Ultrafiltration system: protect filter bucket, protect filter element

[commodity parameter]

The outlet water pressure is about 0.2MPA, that is 2KG water pressure

When the influent increases 1MPA, the outlet water pressure increases by 0.04MPA

Valve flux: small diameter of the valve body is larger than the same diameter of the pipeline, so almost no water resistance, so at low water pressure, will not make users feel inconvenience

The valve life: about 5 years (in the 1MPA pipeline in the water under pressure, 300 thousand fully open all closed test is not unusual, according to the family daily use 150 times the valve calculation, so that life is more than 5 years)

Body bearing capacity is 2MPA (considering material strength and actual requirement, we only test 2.5MPA)

Parameter value: when the influent 5KG, the effluent 2KG

Flow value: 102ml/S