Menu

Connect with us

12V vehicle 220V household toys, charging and inflating dual-purpose air bed, swimming ring pump, swimming pool, electric pump

price:USD$104.64
discount 70% in 2018-07-16 to 2018-07-18
price: USD$ 73.25
freight :USD$18.00,(Express)
freight :USD$7.00,(Postal parcel)
views:0
Search Similar or mail to saler or send message to saler

Pay with PayPal, PayPal Credit or any major credit card

******

A lot of customers will not be able to swim laps after they receive the pump. Now let me explain.

1, because the gas nozzle swimming laps swimming appliances is relatively small which generally have a thin film layer to prevent leakage of the gas nozzle, select the minimum number (don't question the gas nozzle on both sides of the small pores Oh, does not affect the inflation, main function is for cooling holes), hand pinch live swimming ring gas nozzle is the most at the bottom of a hand pump [Note: the gas nozzle at the bottom of the swimming ring,!!!! Switch on the electric pump switch.

2, the air mouth pinch flat again charge, swimming ring products gas mouth mouth has a layer of film to prevent leakage, if not pinch will block gas into!

 

Inflation: generally 35 minutes or so good (Chong relatively fast, do not burst burst, due to burst reasons caused by the problem, the store is not responsible for OH)

Pumping: because the pumping effect is not good to recommend the inflatable bed, valve open and take artificial difficult to drained when then pump pumping 

Disadvantages: must connect the power supply or car cigar lighter, there is dry sound.

 

Inflatable method:
1. connect the pump to the 220V power supply.
2. connect the inflatable parts to the inflatable mouth, turn on the switch and start inflating ("-" means open, start "inflatable", "O" means closing, stop charging).
3. pay attention to the pneumatic valve should not be blocked, otherwise the pump may be damaged due to overheating.
4., take care not to inflate your gas outlet. Please close your eyes to see the gas outlets and vents in our baby show.
 

 


Pumping method:
1. open the air outlet for pumping gas
2. connect the right sized fittings to the suction port of the vacuum pump (if the suction port size is just right, you don't need the three parts). Connect the interface, then turn on the switch and start pumping ("-" means open, start pumping, "O" means closing, stop pumping).
3. pay attention to the suction valve should not be blocked, otherwise the pump may be damaged due to overheating.
4., take care not to inflate your gas outlet. Please close your eyes to see the gas outlets and vents in our baby show.