discount 70% in 2018-09-24 to 2018-09-26
price: USD$ 978.60
freight :USD$7.00,(Postal parcel)
Search Similar or mail to saler or send message to saler
110V is also in stock
The power of this set of wire machine has been upgraded, 2300W weather high temperature plus casingTorque is big Use when the customer response said fever is a normal phenomenon in fact, do not need to worry about the machine will burn, this machine has 6 month warranty in June if the motor burned the shop within the warranty, received any questions you can contact to help you solve, do not easily give bad review oh.
Buyers must readPrecautions for use:
(1) when the power supply is plugged in, the light is not switched on by the switch, and there is an insurance button on the side of the switch, so the switch must be connected with the switch to connect the power supply.
(two) if the pipe is cut off, don't rush to thread it immediately. When the pipe is cooled, the tube will swell when the pipe is cut. If the wire is not suitable at this time, the pipe will be inflated (three) the fixture must take the pipe clamp clamping can not have a little loose, tighten the hand after taking a tube clamp rod in the rotating a circle over tight or loose threads set out unevenly, bad will die, die consumption oh.
We can open the general ticket plus 5 points
6 head electric sleeve machine 4 points -2 inch
4 head electric sleeve machine 4 points -1.2 inch
Model: ZIT-KY01-30 (4 heads)
Specifications; 1/2 inch -1.2 inch power 2000W
Model: ZIT-KY01-50 (6 heads)
Specifications; 1/2 inch -2 inch power 2300W
Material: all copper wire motor
Color; the main color (red) is based on actual stock
Weight; the full weight of the machine 6.5KG4 head; the full weight of 16.5KG6 head is 20KG
Packaging; blow molding box packaging
This paragraph if the cargo return need to pay the 50 yuan shipping freight.
Fittings:6individualDie head: 1/2 "3/4" 1 "1-1/4" 1-1/22 1 inch pot holder manual threading machine 980 yuan
Fittings:4 die head: 1/2 "3/4" 1 "1-1/4" ABURATSUBO 1 threading machine manual clamping seat 850 yuan
1, a hand-held electric threading machine compared with the desktop electric threading machine has the advantages of light weight, only the host7Kg.；
2, high quality die head, long service life, thread clear, and can be replaced quickly die head; labor-saving and quick operation, convenient carrying;
3, no site restrictions, in the construction site or unconventional occasions can be flexible operation.
4, this product is suitable for industrial and mining enterprises, colleges and universities, family maintenance, small and medium-sized engineering team, can be used for heating, tap water, heating, gas and other construction operations. This product supports the use of standard pipes。
5, from the hardware market to facilitate buy generic die head.
1, choose the corresponding die head, the circlip is pulled from the right after installation in the host.
2. Clamp and clamp the tube approximately equal to the arm of force (L2 equal to L1).
3. Switch the positive and negative switch in the downward arrow position, start switch and auxiliary contact.
4, in the hard tube such as galvanized pipe, copper tube to refuel in time, plastic pipe without refueling.
5, pay attention to the pipe clamp seat right shift process can not contact with the host, otherwise it will hurt the host.
6, after the machine stops stability, and then pull the reverse switch upward arrow position, exit the pipe.
7, GMTE-03 (C) in the 1 / 2 - 1 / 1 "4" pipe first adapter was installed on the host and then loaded on the die head.
8. This product supports the use of standard pipes。