Menu

Connect with us

Custom aluminum aluminum curtain wall to wall plus fluorocarbon coating aluminum honeycomb plate punching molding

The curtain wall aluminum sheet is usually treated by cleaning and Chromizing on the surface of the curtain wall, and then using fluorocarbon spray. Aluminum sheet is polyvinylidene fluoride resin (KYNAR500), a fluorocarbon primer, a topcoat and a varnish.

price:USD$112.00
discount 70% in 2018-08-14 to 2018-08-16
price: USD$ 78.40
freight :USD$18.00,(Express)
freight :USD$7.00,(Postal parcel)
views:0
Search Similar or mail to saler or send message to saler

Pay with PayPal, PayPal Credit or any major credit card

  Foshan Zhongxin decoration materials Co., Ltd.yesDesign, sell, produce, install, after saleAn integrated enterprise.Main products are: indoor and outdoor curtain wallAluminum plate, aluminium screen, aluminum window, aluminum side pass, aluminum buckle, aluminum ceiling, aluminum curtain wall, aluminum plate, aluminum plate, aluminum honeycomb, Lv Geshan hanging plate, aluminum stripAnd the combination of other wood series, aluminum ceiling, aluminum ceiling; oxide coating, matte, film, sculpture and other aluminum metal ceiling. The series of products applicable to: subway, shopping malls, plazas, hotels, exhibition halls, conference rooms, office buildings, airports, Home Furnishing, cinema, bar, gymnasium, swimming pool, channel aisle, train station, bus station, bank, hospital, club, office, communications bureau, post office, dance, field plant, car wash, gas station, leisure venues, commercial building etc..We have developed products of high technical engineering staff, excellent designers provide high-quality technology, experienced technical personnel, young and enthusiastic sales team, responsible for workshop production personnel who master professional diligence, packaging, logistics service personnel responsible for. The perfect team will provide you with the design plan -- Research and development -- sales and production follow-up -- production, packaging, logistics, installation, technical guidance -- one-stop service. The curtain wall aluminum sheet] is the surface of the curtain wall after cleaning, chromizing and other pretreatment, and then the use of fluorocarbon spray treatment. The aluminum sheet is a polyvinylidene fluoride resin (KYNAR500) for fluorocarbon primers, topacquers and varnishes.

 

baseThis introduction

 

Aluminum sheet is a new type of curtain wall material, which uses high quality aluminum alloy sheet as the base material, and then passes through numerical control bending technology and spray decorative coating on the surface.

1100H24, 1060H24, 3003H24, 5005H24 and other single-layer aluminum alloy plates are used for the aluminum sheet base material.

The structure is mainly composed of aluminum veneer panel, stiffener and corner etc.. The maximum workpiece size can reach 8000mm * 1800mm (L x W)

Paint using the United States PPG, Valspar Valspar, AKZO NOBEL AkzoNobel KCC, South Korea, Holland and other well-known brands of paint, coating is divided into two, three with two coated with a baked baked, the coating properties of AAMA (American architectural Manufacturers Association) and ASCA American Architectural Association) the AAMA260598 standard spray.

Conventional thickness: 1.5mm, 2.0mm, 2.5mm, 3.0mm.

Commonly used specifications: 600*600mm, 600*1200mm

Important features

1. Light weight, good steel, high strength 3.0mm thick aluminum plate per square plate weight 8kg, tensile strength 100-280n/mm2

2, good durability and corrosion resistance. The PVDF fluorocarbon paint with kynar-500 and hylur500 as the base can be used for 25 years without leg color. Aluminum single board curtain wall building

3. The process is good. With the first finishing process, the aluminum plate can be machined into a variety of complex geometric shapes, such as plane, arc and spherical surface.

4, the coating is uniform and the color is varied. The advanced electrostatic spraying technology makes the paint and aluminum plate attach evenly and uniformly, and the color is varied, and the choice of space is big.

5, not easily tarnished, easy to clean and maintenance. The non stickiness of the fluorine coating film makes it difficult to attach the surface to the contaminants, and it is better to be clean.

6. The installation and construction are convenient and quick. The aluminum plate is formed in the factory. The construction site does not need to be cut, and it can be fixed on the skeleton.

7. It can be recycled and reused, and it is favorable for environmental protection. Aluminum plate can be recycled 100%, different from glass, stone, ceramic, aluminum plastic plate and other decorative materials, the recovery of the high value.

Application

1, building facades, balconies, canopy, Liang Zhu

2, the airport, the station, the hospital

3, the conference hall, the Opera House

4. The stadium

5, reception of the hall and other high-rise buildings

Application scope

Because of its good processing performance, shape and appearance, color changing is not easy to stain, easy cleaning and maintenance and other advantages, not only can be used in outdoor decoration can also be applied to interior walls, ceiling, wall, column, beam, package bag, balcony door, window, counter, billboards, and other crafts and even screen decoration.

Feature introduction

The material and structure of the aluminum sheet curtain wall.

Aluminum sheet curtain wall adopts high quality and high strength aluminum alloy sheet, its common thickness is 1.5, 2, 2.5, 3.0MM, and the model is 3003, and the state is H24. The maximum size of the conventional material is 1220MM x 2440MM. Its structure is mainly composed of a panel, stiffener and bracket component. Code can be directly by the panel bending, stamping molding, but also in the small side panel on riveting corner molding. The stiffener is connected with the welding screws after the plate surface, making it a solid whole, which greatly enhances the strength and rigidity of the aluminum veneer curtain wall, and ensures the smoothness and wind resistance and anti-seismic capability of the long term use. If the sound insulation is needed, a high efficient sound insulation material can be installed on the inside of the aluminum plate.

Surface treatment of aluminum single board curtain wall

The surface of the aluminum sheet curtain wall is usually treated by chromizing and other pretreatment, and then the fluorocarbon spray is used. Polyvinylidene fluoroethylene resin (KANAR500) for fluorocarbon paint and varnish. It is generally divided into two, three or four. Fluorocarbon coating has excellent corrosion resistance and weatherability. It can resist acid rain, salt spray and various air pollutants. It has excellent cold and heat resistance. It can resist strong ultraviolet radiation, and it can keep color free, non powdery and long service life in a long time. Our factory selects the world famous fluorocarbon coatings and coatings manufacturers PPG, DNT, AKZO, NIPPON and other companies high-quality fluorocarbon coatings, the color is widely selected, customers can directly choose the color boards from manufacturers or provide color plates.

Application scope

The aluminum veneer curtain wall is suitable for all kinds of interior and exterior walls, lobby facades, pillar ornaments, elevated corridors, footbridges, elevator covers, balcony packaging, advertising signs, indoor special-shaped ceiling and so on.

    1. Light weight, good steel, high strength 3.0mm thick aluminum plate per square plate weight 8kg, tensile strength 100-280n/mm2

 

2, good durability and corrosion resistance. The PVDF fluorocarbon paint with kynar-500 and hylur500 as the base can be used for 25 years without leg color. Aluminum single board curtain wall building

 

3. The process is good. With the first finishing process, the aluminum plate can be machined into a variety of complex geometric shapes, such as plane, arc and spherical surface.

 

4, the coating is uniform and the color is varied. The advanced electrostatic spraying technology makes the paint and aluminum plate attach evenly and uniformly, and the color is varied, and the choice of space is big.

 

5, not easily tarnished, easy to clean and maintenance. The non stickiness of the fluorine coating film makes it difficult to attach the surface to the contaminants, and it is better to be clean.

 

6. The installation and construction are convenient and quick. The aluminum plate is formed in the factory. The construction site does not need to be cut, and it can be fixed on the skeleton.

 

7. It can be recycled and reused, and it is favorable for environmental protection. Aluminum plate can be recycled 100%, different from glass, stone, ceramic, aluminum plastic plate and other decorative materials, the recovery of the high value.

1100H24, 1060H24, 3003H24, 5005H24 and other single-layer aluminum alloy plates are used for the aluminum sheet base material.

The structure is mainly composed of aluminum veneer panel, stiffener and corner etc.. The maximum workpiece size can reach 8000mm * 1800mm (L x W)

Paint using the United States PPG, Valspar Valspar, AKZO NOBEL AkzoNobel KCC, South Korea, Holland and other well-known brands of paint, coating is divided into two, three with two coated with a baked baked, the coating properties of AAMA (American architectural Manufacturers Association) and ASCA American Architectural Association) the AAMA260598 standard spray.

Conventional thickness: 1.5mm, 2.0mm, 2.5mm, 3.0mm.

Commonly used specifications: 600*600mm, 600*1200mm

 

Installation method

 

1. Construction preparation:

1, check the construction drawings and field measured dimensions in detail, so as to ensure the improvement of design and processing. Meanwhile, check with the structural node graph carefully, find the parts which do not conform to them, and make corrections as early as possible.

2, check whether the quality meet the requirements of the drawings of the keel anyway. In accordance with the design specifications for installation of horizontal and vertical keel. The connecting bolts installed keel anyway can not leak. In order to ensure the installation accuracy of the beam plate, should bar through mullion with theodolite, deformation seam, settlement joints, variable cross-section should be properly handled, to meet the requirements of the use of.

3. The material and machining geometry of the metal connector must meet the design requirements. The material must have the factory certificate and the re examination report.

4. The connection between the connector and the vertical keel should be reliable, and do not leak the cartridge.

5. Examine the material of the aluminum plate, the color of the plate, the strength, the appearance, the processing precision, etc., to see if it is in conformity with the design and the national standard.

(1) check the machining precision of the length and width deviation of the aluminum plate, the diagonal dimension difference, the side parallelism deviation and so on.

The processing precision of the aluminum sheet in the United century is required to be carried out according to the standard of the enterprise which is far higher than the national standard.

(2) check the flatness of the plate surface of the aluminum plate:

The surface of the plate is checked by 3M by the ruler, and the deviation is 3mm. The surface vertical and horizontal 3M inspection on foot, the allowable deviation of 2.5mm, yin and yang angle with the square check error of 2.5mm.

(3) check the angle of the folding angle of the aluminum plate and the angle deviation of the multi folded plate. It should be within 0.50 or less. The radius of the fillet radius of the aluminum plate is in accordance with the design requirements, and the flange is formed at a time.

(4) the position of the riveted ear on the plate is correct.

(5) surface forming plate provided with no obvious indentation marks and indentation surface anomalies, no damage, no hidden and markings.

(6) rib and aluminum back connection with implant, implant in the finished aluminum surface should not have obvious bumps and depressions and coating surface may not affect the perception of the phenomenon, firmly fixed.

(7) the aluminum plate should be marked according to the requirements of the design drawing.

6, board into the field, piled up according to specifications, to prevent collision and pollution.

7, before the installation of the construction of scaffolding, installation operation of the basket to the relevant departments for acceptance. Check whether the scaffolding is in line with the construction and specification requirements of the curtain wall.

Two, aluminum plate installation:

1, the vertical transportation equipment, such as the aluminum plate and the fittings, is transported to the construction points.

2, use the cleaning agent to clean the surface of the aluminum plate on the side of the interior and the frame of the column.

3, the whole aluminum plate by aluminum (ear) around the corner connected with keel, fixed keel.

4, if it is installed in the fixed mode, seamless, available in the corresponding position to the keel drill hole, and then use the flat (countersunk head riveted aluminum screws); if it is with glue joint plate, steel screws (also known as available to the flange screws or any nail, see photo) directly connected hole aluminum bracket drilling to pass through the fixed keel, but should pay attention to control the elastic adjustment of aluminum plate drill.

5, the aluminum plate into the trial assembly, first the aluminum plate slightly fixed on the keel, pay attention to the installation precision control, adjust the plate and then tighten.

6, when the aluminum plate is installed, the wall should be mounted on the wall according to the number of the aluminum plate.

7, the installation of aluminum plate from the front, large area, corner of the beginning, from the bottom to the principle of installation.

8. The connection between the aluminum plate and the keel should be in accordance with the requirements of the drawings. It should be firm and reliable, and bolts should not be installed.

9, the corner of the curtain wall and the surrounding wall, the connection structure of the upper and lower seals and the handling of the deformation joints should meet the requirements of the design.

10, node structure and closed up

The joint: usually at the joint node is easy to appear on uneven or the surface is not equal, it should be installed on one side of a plate, the positioning line, with the other side plate position horizontal and vertical control lines, to meet all the requirements on both sides of the board, and then pulling rivets, pressing plate fixed;

The wall is closed up, according to the actual size of a water retaining plate, the lower end is sealed, and the gap between the board and the cover wall, prevent rainwater into the interior;

11, when installing, we should pay attention to the gap between the plates and the level of the interface of the panel.

12. The aluminum plate is installed and covered with plastic film or other materials in the easily polluted parts.