Menu

Connect with us

Geest old toilet accessories drain valve connected toilet flushing water inlet valve button set

price:USD$63.00
discount 70% in 2018-09-23 to 2018-09-25
price: USD$ 44.10
freight :USD$18.00,(Express)
freight :USD$7.00,(Postal parcel)
views:0
Search Similar or mail to saler or send message to saler

Pay with PayPal, PayPal Credit or any major credit card

Shopping instructions

1. drainage valve total height of three kinds, 20cm, 24cm, 28cm (measuring water tank raised part to the height of the water tank edge), please be sure to measure again and again, buy wrong caused by the return of the buyer to bear the postage.

2. old water inlet valve is 4 points interface, the main body height can be sawn short according to the depth of water tank, most of the water tank is applicable.

3. buttons are divided into large, medium and small, the package button default large, can also be replaced by medium or small, need to change, please contact customer service instructions.

Please measure the height and the diameter of the tank wall button 4. before buying, if not sure, you can look at the details we introduced in the video.

The product defaults to the drain valve for the toilet. If you need the split tank drain valve, please contact the customer service and take another one. (Note: the water tank of the squatting pan is split water tank)

I. Introduction of drain valve

1., this drain valve has three kinds of height, namely 20CM, 24CM, 28CM, suitable for different water tank height use, before buying, please measure the internal height of the water tank(Methods of measurement are described below)So as not to buy wrong.

2. drain valve is suitable for hole with diameter of 62-80MM, although most of them are applicable, and there are a few individual can not be used, it is recommended to measure the hole in the house.

3. please according to the following picture correct measurement, if not quantity, please contact customer service, our customer service will teach you how to measure.

Two, button mediationShaoxing

1. set buttonDefaults to large size (also can change medium or small, need to note), the size is different, before buying the quasi size.

2If you need to change the buttons of other shapes, you can contact the customer service to make up the difference.



 

Please choose the corresponding height drainage valve according to the internal height of the toilet water tank.

20CM drain valve and 24CM28CM drainage valve shape is slightly different, the installation aperture is the same.

Installation is more convenient, can generally remove the old drain valve, you can put the new installation.

Common problems of toilet cistern flushing:

1, ask: my toilet has been in the water, can not stop what parts are broken?

Answer: the inlet valve is broken,replaceInlet valve

2, ask: after my toilet flush water, the water has been flowing out of the toilet, what is the problem?

Answer: drain valve is broken, replace the drain valve.

3, ask: water tank button according to the water bomb can not come up, how to do?

Answer: the button time is not flexible, replace the button.