discount 70% in 2018-09-26 to 2018-09-28
price: USD$ 105.00
freight :USD$7.00,(Postal parcel)
Search Similar or mail to saler or send message to saler
|Dispensers recommend hot baby|
Domestic high grade band saw blade for bimetal machine
(low price, good quality) value,
45 steel with high hardness can be cut,
Long life! Quality stability!
There are three types of teeth, 2/3, 3/4, 4/6
2/3 saw teeth for more than 100mm material (aniseed)
3/4 gear is suitable for sawing material below 100mm
4/6 teeth are suitable for sawing small materials
Warm reminder:Buy the saw blade according to the size and material of the material you sawTooth selection.
For the durable saw blade, the key is to pick the teeth.
Materials with 50mm diameter less than 4/6 teeth
Material diameter 50mm-150mm between 3/4 teeth
Material diameter 150mm above, with 2/3 teeth
Saw pipe seamless steel pipe with good tensile tooth
Special notice for installation and use of band saw blade (important)
1. before installation, check the direction of the saw tooth in detail so that the cutting direction is consistent with the rotation of the band sawing machine.
2. check the pattern and number of teeth of the saw band / inch, whether it is consistent with the material and size of the cutting material.
3. adjust the tension of the saw band should be moderate, too tight, easy to break the belt, too loose easy to break teeth and cutting oblique.
4. cutting fluid according to the cutting material adjustment concentration, carbon steel quasi thin, stainless steel quasi thick. And regular replacement.
5. all new saw blades must be run in before cutting. Refueling, will raise the blade to a certain height, avoid severing saw.
Running in of new saw blade
The new saw blade must be run in before the official use. The service life of a saw blade without running in or without running in is 1/3 or less of a running saw blade.
The feed rate during 1. running in is 20-30% of normal feed rate.
The 2. period length is about 5-10% and the pre? Ti?.
3. the running speed should be 20-30% during normal cutting.
4. sawing belt starts from running in period and gradually transits to normal cutting. Don't increase the feed rate and the belt speed each time.
Such as 45# steel, 100 round round rod cutting 20 knives can be normal cutting. If the cutting material has high hardness or large cross section, the number of running in tool can be reduced correspondingly. On the contrary, the number of running in tool should be increased.
Buyers must read!
The baby in this shop is in kind, baby size, the buyer also depends on size. Before buying any of our products, we must first see the details of the baby, do not understand, please ask the shopkeeper, so as not to buy back, and his imagination there is a gap.
After receiving the inquiry, the purchase and receipt of the gap, causing unnecessary misunderstanding, that is not good oh ~!
The standard postage is the postage of three places in Jiangsu, Zhejiang and shanghai!
Every day before 6 p.m., photographed and paid, shipped 6 points after the day, the next day shipped Oh ~! The default rhyme express, if necessary, you can send SF, tact, Shen Tong, Zhong Tong and other courier freight count!.
According to the actual freight, more refund and less repair. Refer to the postage on the link.
Please contact with the owner before the payment, modify the freight.
Please accept the goods must be when the express surface unpacking, first see if things are intact, if damaged, please reject, immediately contact us, we will arrange for you to send good! If there is no sign of inspection, on behalf of the goods intact, after the signature and then unpacking, found damaged, need to be replaced, to be responsible for the return of freight, and our side to send the freight is responsible for our sellers! Do not like goods, to return, responsible for back and forth freight! To pay rejection Oh (postage 2 times), want to understand!
Please do not easily give bad review, hope that parents can think about, the goods have any questions, you can contact us directly Oh, we can help you understand the difference in assessment immediately resolved, can not solve any problems! Our ultimate goal is to get people satisfied with their belongings! Thank you for your understanding!